Consent Calendar: OGB Meeting — 1 October 2025

No objection to issuance of permit to replace two windows on the second floor of the rear elevation with full frame, six-over-six, simulated-divided-light, wood windows, per supplemental materials received 22 September 2025, PROVIDED the exterior muntins are putty profile and the spacer bars a medium value color. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to raise walls and roofs on the rear additions, build a new rear addition, and shift the location of the retaining wall in order to widen the driveway, per supplemental materials received __ September 2025 and brick and mortar mockup completed 25 September 2025, PROVIDED the brick on the existing chimney is reused for the proposed chimney stack; the applicant use Type N or O mortar; and the applicant confirm there will be no alterations to the plans for the proposed attic closet AC unit. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to replace a wood fence and gate separating the rear yard from the parking area with a new cedar board fence, six-feet high, to match the neighboring property fence, per materials received 22 September 2025, PROVIDED the fence is located on the subject property, the finished side faces the public alley, and post caps are wood or metal. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to concept design for various alterations to facade, front stoop, and retaining wall and replace fence, per supplemental materials received 19 September 2025, PROVIDED the existing railing is retained and reinstalled on the replacement stoop, and the replacement shutters match the design of those evident in the 1950s archival photographs of the building. File permit submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to concept design to replace and repair the front stoop, handrails, and replace front door, PROVIDED the replacement door is a colonial revival design and the applicant studies possible restoration and reuse of masonry stoop, stone landing, and railings. File permit submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to issuance of permit for installation of new HVAC unit and heat pump on roof, per supplemental materials received 22 September 2025.

No objection to issuance of permit for replacement of 6-panel solid wood door at front to match existing, per supplemental materials received 22 September 2025. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for non-illuminated, flush, pin-mounted letter sign reading “Milo & Mav,” installed above the storefront entrance, per materials received ___ September 2025, which indicate sign would be installed at the mortar joints. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for new HVAC units for Yates Field House, per supplemental materials received ___ September 2025, which indicate the existing 7-ft-tall fence will be replaced with a 10-ft-tall vertical-board fence to screen the equipment. The 13’-tall ductwork would still be visible above the fence. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for rooftop solar, per the supplemental materials received 29 September 2025 and mockup completed 18 September 2025, which indicate per the Board's direction that the the proposed main breaker enclosure is installed inside the building. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for removal of the stucco on the side and rear elevations and restoration of any historic siding uncovered underneath; new front railing; fenestration reconfiguration on the rear; new deck and stairs; roof replacement; and underpinning, per supplemental materials received 22 September 2025. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for the installation of a sign reading "Izzy" above the center storefront window, installation of an additional trim piece towards the top of the building, removal of one light fixture to the right of the door, per supplemental materials received 29 September 2025. The additional trim piece MUST be installed as a small remedy to the poorly and inaccurately executed storefront restoration. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for 22 rooftop solar panels on the residence and garage, per supplemental materials received 24 September 2025. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit for new awning at corner entrance, per supplemental materials received ___ September 2025, PROVIDED no signage is included on the awning and the crenellation is removed. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to concept design to alter front entrance, remove rear stairs, and install and replace windows, per supplemental materials received 23 September 2025, PROVIDED the applicant include detailed drawings for the proposed storefront and confirm the proposed doors would not collide if they need to swing out; all newly installed or recently replaced windows must conform with the OGB’s Window Policy and Guidelines; the applicant includes a detailed window and door schedule; the windows on the rear and south elevations must be uniform in design; the applicant provide more information on the steel door installed on the rear elevation without OGB review; the brick infill and cast stone recently added under the second-floor ganged windows must be retained instead of the proposed wood panels; and the brick around the newly installed windows on the south elevation are to be repaired and the applicant study the installation of lintels above. File permit submission at DOB with detailed and dimensioned drawings for review by the Commission.

No objection to issuance of permit to replace fence on east side of house, along existing driveway, using cedar horizontal boards, per materials received 12 September 2025. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.

No objection to issuance of permit to add shutters on the front elevation and add a new window and opening on the rear elevation, per supplemental materials received __ September 2025, PROVIDED the glazing on the proposed window is clear and untinted without a Low-emissivity coating and the applicant provide shutter mounting details and the design for the shutter dogs. Note: Any subsequent modifications to the approved design, including those made during DOB technical review, must be resubmitted to the Commission for approval prior to the issuance of a permit.